Chapter 3

ADR: A Classifier for Fine Moist Materials

W. de Vries and P.C. Rem

Abstract

MSWI-bottom-ash (IBA) and C&D-waste (CDW) are notoriously difficult to classify or separate at grain sizes below 12 mm. The problem is caused by the combined presence of (-1 mm) fines and moisture, which act together to form agglomerates and foul screens and other separation equipment. Results are presented of an experimental study into the separation performance of a new type of classifier, called Advanced Dry Recovery (ADR), which is designed to deal with fine moist materials. The study focused on IBA and two types of CDW: crushed concrete and sieve sand. For each of these three materials, the particle size distribution and moisture content of the fine and coarse ADR products were analyzed. It was found that more than 80% of the fines of the input materials is recovered into the fine product. For IBA, the reduction of fines in the coarse product resulted in more than double of the -8 mm non-ferrous metal recovery at the downstream eddy current separators. The coarse products from crushed concrete showed sufficiently low levels of cement fines, wood and foams to consistently satisfy the European norm for secondary aggregates and avoid problems with caking in storing this material. In a final experiment, about 23% of sieve sand was reclaimed as reusable aggregate.

Total Pages: 43-58 (16)

Purchase Chapter  Book Details

RELATED BOOKS

.African Meteorites.
.Towards a Unified Soil Mechanics Theory: The Use of Effective Stresses in Unsaturated Soils (Third Edition) .
.Towards a Unified Soil Mechanics Theory: The Use of Effective Stresses in Unsaturated Soil, Revised Edition.
.250 Years of Industrial Consumption and Transformation of Nature: Impacts on Global Ecosystems and Life.