Chapter 4

Characterization and Application of Structured Packing for CO2 Capture

Rosa-Hilda Chavez, Eva M. de la Rosa and Javier de J. Guadarrama

Abstract

The purpose of this work is to evaluate the minimum energy consumption for solvent regeneration and maximum CO<sub>2</sub> absorption with 600 t/hr flue gas flow simulated by Aspen Plus™ of CO<sub>2</sub> capture process, using Monoethanolamine (MEA) at 30 weight%. The parameters studied were: 1) energy consumption at reboiler of stripper, 2) absorption separation efficiency, 3) flow ratio (L/G) in order to find the load on turbulence regimen in absorption process, and 4) absorption and stripper column diameters at different flue gas flows. This work contributes structured packing study in separation columns, like: ININ 18, Sulzer BX and Mellapak 250Y, and the advancement in CO<sub>2</sub> capture technology. Hydrodynamic and mass transfer models were used to evaluate pressure drops and height of mass transfer equivalent unit, per each packing, from experimental data of CO<sub>2</sub> absorption column and predict up to 600 ton/h flue gas flow by Aspen Plus™. The results showed that Sulzer BX has the highest volumetric mass transfer coefficient values and the lowest height of mass transfer equivalent unit, with 3.76s-1 and 0.316m, respectively, and the most absorption efficiency of 89.17% in comparison with respect to the other two packings and 120MW reboiler energy.

Total Pages: 95-118 (24)

Purchase Chapter  Book Details