Recent Technologies in Capture of CO2


by

Rosa Hilda Chavez

DOI: 10.2174/97816080592491140101
eISBN: 978-1-60805-924-9, 2014
ISBN: 978-1-60805-925-6



Recommend this eBook to your Library

Indexed in: EBSCO.

Recent Technologies in the capture of CO2 provides a comprehensive summary on the latest technologies available to minimize the emiss...[view complete introduction]

Table of Contents

Foreword

- Pp. i-ii (2)

Lydia Paredes Gutierrez

Download Free

Preface

- Pp. iii-vi (4)

Rosa-Hilda Chavez and Javier de J. Guadarrama

Download Free

List of Contributors

- Pp. vii-viii (2)

Rosa-Hilda Chavez and Javier de J. Guadarrama

Download Free

Oxy-Fuel Combustion in Fluidized Beds

- Pp. 3-39 (37)

Isabel Guedea, Irene Bolea, Carlos Lupiañez, Luis M. Romeo and Luis I. Díez

View Abstract Purchase Chapter

Gas Separation Membranes Used in Post-Combustion Capture

- Pp. 40-68 (29)

Li Zhao and Ludger Blum

View Abstract Purchase Chapter

Minimizing Energy Consumption in CO<sub>2</sub> Capture Processes Through Process Integration

- Pp. 69-94 (26)

Alma Esthela Torres-López, Martín Picón-Núñez and Rosa-Hilda Chavez

View Abstract Purchase Chapter

Characterization and Application of Structured Packing for CO2 Capture

- Pp. 95-118 (24)

Rosa-Hilda Chavez, Eva M. de la Rosa and Javier de J. Guadarrama

View Abstract Purchase Chapter

Calcium Looping Technology for CO2 Capture

- Pp. 119-146 (28)

Pilar Lisbona, Yolanda Lara, Ana Martínez and Luis M. Romeo

View Abstract Purchase Chapter

Liquid-Gas Contactors Material Properties for CO2 Capture in Absorption Column

- Pp. 147-177 (31)

Araceli Salazar, Rosa-Hilda Chavez and Javier de J. Guadarrama

View Abstract Purchase Chapter

Rate-Based Models and Design of Packed Columns for Absorption of Carbon Dioxide

- Pp. 178-242 (65)

Andrés Emilio Hoyos-Barreto, Anja Müller, Felipe Bustamante and Luz Villa Luz Villa

View Abstract Purchase Chapter

Analysis of CO2 by Determination of Carbon and Oxygen Using Ion Beam Analysis (IBA)

- Pp. 243-271 (29)

Juan A. Aspiazu and Arturo Aspiazu

View Abstract Purchase Chapter

Index

- Pp. 272-295 (24)

Rosa-Hilda Chavez and Javier de J. Guadarrama(

Download Free

Foreword

Global warming is a result of increasing anthropogenic CO2 emissions, and the consequences will be dramatic climate changes if no action is taken. One of the main global challenges in the years to come is to reduce the CO2 and GHG emissions.

It is widely accepted that the climate change issue is a global concern that directly links with the emission of greenhouse gases notably carbon dioxide (CO2) associated with the use of fossil fuels around the world. Last decade 32.6 Gt of CO2 was released to the atmosphere as a consequence of the global harnessing of fossil fuels. From this amount 41% of the CO2 relates to coal. From a more simplistic point of view the challenge may be construed as just obviating these emissions either by swapping to carbon-neutral primary energy possibly wind, biomass, photovoltaic and nuclear, or by isolating the CO2 and preventing it from being released to the atmosphere (or combined). But the challenge, also involves a geopolitical dimension represented by a fast-growing global population and increasing prosperity level. This dimension is prone to justify the extended electrification in developing nations. On this basis prognoses suggest that the global electricity demand will grow by a factor 3 to 7 within this century.

So far, no sustainable primary energy has been identified as being capable of supplying electric power on demand - in very large quantities at a reasonable cost the global primary energy supply will continually be dominated by fossil fuels over the foreseeable future - regardless of the CO2 emissions that constitute a major drawback of these fuels.

The previous considerations are behind developing a new book on this topic and caused the motivation. The book edited by Prof. Chavez provides a broad overview on several techniques feasible to developed and reduce the amount of CO2 released into the atmosphere.

We are most grateful to the numerous authors who put so many times into writing outstanding chapters. This book includes all the relevant and current information on:

  • Expand knowledge and research to establish criteria and solutions to reduce of
  • GHG emissions.
  • Awakening interest of new generations in knowledge and research in this area.
  • Establish links between researchers, as well as in the academic community.
  • Establish solutions to this huge climate change in the world.

Much information is completely updated. Although we believe that this book will provide a clear understanding of these techniques, we invite our readers to inform us about differences of opinion they may have with its contents and areas that need improvement.

Lydia Paredes Gutierrez
General Manager
Instituto Nacional de Investigaciones Nucleares
Mexico


Preface

As the Editor of Recent technologies in capture of CO2, it is a great pleasure to introduce this E-Book to readers, researchers, future authors, and colleagues. The decision by Bentham to launch this E-Book is very timely. It is an honor that so many distinguished scientists have been willing to support this initiative. The aim of Recent technologies in capture of CO2 is to provide a unique, multidisciplinary platform for the dissemination of leading edge research work on CO2 capture and minimizing of environmental impact of carbon dioxide. This E-Book covers the vibrant and diverse field of carbon dioxide capture, from the basic science and the development of new processes, technologies and applications.

Part I. Oxicombustion

Chapter 1 by Prof. Luis M. Romeo and co-authors on Oxy-fuel combustion in fluidized beds, presents Fluidized beds with particular features driving this technology as an appropriate candidate technology to apply oxy-fuel combustion, producing a highly concentrated CO2 flue gas stream to be processed and stored. Still, there are several issues differentiating the conventional combustion to that with O2/CO2 mixtures. This chapter examines the main issues involved in oxy-fuel combustion in fluidized beds through the experimental results obtained in the CIRCE oxy-fuel bubbling fluidized bed.

Part II. Post-Combustion

Chapter 2 by Prof. Li Zhao and Prof. Ludger Blum on Gas Separation membranes used in post-combustion capture describes mass and energy balances for single-stage and multi-stage membrane systems used in coal-fired power plant. In order to evaluate different membrane capture concepts, a comparison with chemical absorption process was carried out, considering different degrees of CO2 separation. Furthermore, a cost model was developed to make a further analysis of the optimized concept in view of the tradeoff balance between material and energy consumption. The correlation between the membrane parameters (selectivity, permeability) and capture cost was investigated.

Chapter 3 by Prof. Martin Picon and co-authors on Minimizing energy consumption in Co2 capture processes through process integration focuses on the thermal integration for minimum external energy consumption of CO2 capture process using amines. Post combustion capture of CO2 through the use of amines is a well established technique; the stand alone process is highly energy intensive since the recovery of the amine solution is achieved through the use of a separation process where heating and cooling are required. Energy integration of the hot flue gas coming from a power station plant from where CO2 is absorbed can serve the purpose of providing the heating and cooling needs to the process. Heat recovery through steam rising is considered for heating, cooling and for the production of power for the operation of pumps and compressors. The results show that the needs of the largest energy user of the process can be fully met by heat integration.

Chapter 4 by Prof. Rosa-Hilda Chavez and co-authors on Characterization and application of structured packing for CO2 capture evaluates the minimum energy consumption for solvent regeneration and maximum CO2 absorption with 600 t/hr flue gas flow simulated by Aspen Plus of CO2 capture process, using Monoethanolamine (MEA) at 30 weight%. The parameters studied were: 1) energy consumption at reboiler of stripper, 2) absorption separation efficiency, 3) flow ratio (L/G) in order to find the load or turbulence regimen in absorption process, and 4) absorption and stripper column diameters at different flue gas flows. This work contributes structured packing study in separation columns, like: ININ 18, Sulzer BX and Mellapak 250Y, and the advance of CO2 capture technology. Hydrodynamic and mass transfer models were used to evaluate pressure drops and height of mass transfer equivalent unit, per each packing. The results showed that Sulzer BX has the highest volumetric mass transfer coefficient values and the lowest height of mass transfer equivalent unit, with 3.76s-1 and 0.316m, respectively, and the most absorption efficiency with 89.17% in comparison with respect to the other two packings with 600 ton/hr flue gas flow treated.

Chapter 5 by Prof. Luis M. Romeo and co-authors on Looping cycles for CO2 capture introduces to the reader the calcium looping process for CO2 capture. This technology makes use of the idea that lime may be reused in a cyclic process to remove CO2 from a mixture of gases where carbonate is calcined to generate a pure stream of CO2 ready for sequestration. This chapter analyses the energy penalties of the Ca-looping CO2 capture system, different types of sorbents and their performance subjected to repeated cycles of carbonation and calcination, the CO2 capture efficiency and the possibility of integration of Ca-looping and power plants to reduce energetic penalties.

Chapter 6 by Prof. Rosa-Hilda Chavez and co-authors on Liquid-gas contactors material properties for CO2 capture in absorption column discusses some structural characteristics and properties of three regular packing materials: metallic, polymeric and ceramic; in order to select the best one to capture CO2 in an absorption column. The study was conducted by making the following tests: geometric physical properties such as wetted area and porosity; mechanical properties like, stress, hardness, modulus and compression resistance, structure and microstructure morphologic, chemical composition, rate of corrosion in electrochemical cell in medium of 1N of H2SO4 and Monoethanolamine (MEA) at 30% in aqueous solution by using standard procedures of the American Society of Testing Materials (ASTM) and own developed procedures for the equipment used. The structures of materials also were evaluated by X-ray diffraction and the surface of the material by scanning electron microscopy. It was concluded that metallic material is suitable in CO2 gas treatment because it presented lower etching of 1N of H2SO4, and MEA at 30% in aqueous solution and giving the most absorption of CO2.

Part III. Chemical Kinetics

Chapter 7 by Prof. Felipe Bustamante and co-authors on Rate-based models and design of packed columns for absorption of carbon dioxide shows details on the selection of the equipment for CO2 absorption, compares rate-based models (RBM) and equilibrium models (EQM) for absorption of CO2 in ammonia, and describes the development of a RBM for reactive absorption. From the literature reviewed and conditions prevailing in the absorption process, it is advantageous to carry out the process in packed columns. The comparison of EQM and RBM showed differences in temperature and concentration profiles along a 10 stages packed column. The temperature profile in EQM shows that the liquid temperature matches the inlet gas temperature at the fourth stage and remains constant until the bottom of the column. From the RBM, on the other hand, three temperature profiles were obtained: interface, gas, and liquid streams; temperatures in the EQM were almost 10C higher than in the RBM. For intermediate stages, the EQM predicted higher mol fraction of CO2 than RBM.

Part IV. Miscellanies

Chapter 8, by Prof. Juan Aspiazu and Arturo Aspiazu on Determination of Carbon and Oxigen captured from environmental samples describes some efficient physicochemical procedure for either CO2 dissociation or recycling. Ion accelerators provide a suite of techniques, collectively referred to as IBA, offering excellent options for the analysis of this kind of contamination.

Finally, I sincerely hope that this eBook on Recent technologies in capture of CO2 will be adopted by readers and authors, and that it will be able to make an important contribution to the development of CO2 capture development community and the scientific achievements in our field.

Rosa-Hilda Chavez
National Institute of Nuclear Research
(Instituto Nacional de Investigaciones Nucleares, Mexico)
Environmental Sciences Management
Environmental Studies Department
Mexico

&

Javier de J. Guadarrama
Toluca Institute of Technology
(Instituto Tecnologico de Toluca, Mexico)
Electrical and Electronics Engineering Department
Mexico

List of Contributors

Editor(s):
Rosa Hilda Chavez
National Institute of Nuclear Research
Mexico




Co-Editor(s):
Javier de J. Guadarrama
Toluca Institute of Technology
Mexico




Contributor(s):
J.A. Aspiazu
Accelerators Department
National Institute of Nuclear Research
La Marquesa
Ocoyoacac, 52750
Mexico


A. Aspiazu
National Autonomous University of Mexico
Faculty of Chemistry
Av. Insurgentes Sur 4411 Ed 25-301, Tlalpan D.F.
Mexico


I. Bolea
CIRCE lnstitute
University of Zaragoza
50018-Zaragoza
Spain


F. Bustamante
Environmental Catalysis Research Group, Chemical Engineering Department
Universidad de Antioquia,
Colombia


R.H. Chavez
National Institute of Nuclear Research
Carretera Mexico-Toluca S/N, La Marquesa
Ocoyoacac, 52750
Mexico


J. Guadarrama
Toluca Institute of Technology, Metepec
Mexico, 52140
Mexico


I. Guedea
University of Zaragoza
CIRCE lnstitute
50018-Zaragoza
Spain


A.E. Hoyos
Chemical Engineering Department,
Universidad de Antioquia
Colombia


Y. Lara
CIRCE lnstitute
University of Zaragoza
C/Marino Esquillor Gomez, 15, 50018-Zaragoza
Spain


P. Lisbona
CIRCE lnstitute
University of Zaragoza
C/Marino Esquillor Gomez, 15, 50018-Zaragoza
Spain


C. Lupiañez
CIRCE lnstitute
University of Zaragoza
C/Marino Esquillor Gomez, 15, 50018-Zaragoza
Spain


A. Martínez
CIRCE lnstitute
University of Zaragoza
C/Marino Esquillor Gomez, 15, 50018-Zaragoza
Spain


A. Müller
Laboratory of Fluid Separations, Department of Biochemical and Chemical Engineering
TU Dortmund University
Denmark


M. Picón
Department of Chemical Engineering
University of Guanajuato
Guanajuato, Gto.36050
México


L.M. Romeo
CIRCE lnstitute
University of Zaragoza
C/Marino Esquillor Gomez, 15, 50018-Zaragoza
Spain


A. Salazar
National Institute of Nuclear Research,
La Marquesa
Ocoyoacac, 52750
Mexico


A. E. Torres
Department of Chemical Engineering
University of Guanajuato
Guanajuato, Gto.36050,
México


A.L. Villa
Environmental Catalysis Research Group, Chemical Engineering Department
Universidad de Antioquia
Colombia


L. Zhao
Institute of Energy and Climate Research,
Fuel Cells (IEK-3), Leo-Brandt-Straße
Forschungs zentrum Jülich, D-52425 Jülich
Germany




Advertisement


Related Journals



Related Books



Webmaster Contact: info@benthamscience.org Copyright © 2017 Bentham Science